I prefer to make many cuts throughout the cut's depth
Bosch vs DEWALT Router Yes, you can. A micrometer adjustment is a vernier type adjustment knob on the fixed base that can be adjusted in legible increments of 1/64". The adjustment knob can be accessible and rotated with an adjustment key (an allen wrench screw, wrench with handle included) through a hole in the table when mounted under a router table. Because your table is unlikely to have the hole pre-drilled, you'll have to drill it yourself, which shouldn't be too difficult. I don't use the above table adjustment because I prefer to be able to view the depth graduations on the dial when I adjust the height. When I use the router's base to mount it to the table, I always place the adjustment dial toward the front so that I can see the modifications as I make them Because this router has a 1/4" and 1/2" collet, it can accept shank bits of both sizes. Personally, I prefer the 1/2" shank, especially in larger bits; they are slightly more expensive,...